GE V6 User Manual download pdf (Page 254)

Secure Perfect 6.1.1 User Manual 252

Status Tab

Digital Output Status Form

This form displays the status of the selected digital outputs according to the information in the micro’s

database, by Reader DO or other DOs, by micro or for all micros.

Select DO Type

• Select Reader to display the DO points available for the readers.

• Select Other to display Aux DOs (the two DO relays available on a 2RP board) and other DO

points. Example DO points include lights, sirens, and door strikes that may be connected to

the micro.

Select Micro

• Select All to display the status for the digital outputs of the type selected in the field Select

DO type found on all micros.

• Select By Micro to display the status for digital outputs of the type selected in the field Select

DO type found on a selected micro. Click the drop-down list to display active micros.

Refresh

Click to get an updated status on the digital outputs. A refresh for a dial-up micro will cause the host to

dial the micro unless they are already connected. The refresh process may take a few minutes.

A refresh selected for an offline micro or micro in error will never be returned.

Column Descriptions:

• DO Number: Number of the digital output.

• Description: Description of the door/DO in the database.

• Micro: Number of the micro on which this digital output is found.

• Current State: Displays the state of the digital output.

• Date: Displays the date that the status was requested.

• Time: Displays the time that the status was requested.

If this is a reader DO, the states are:

• Lock: The door is locked.

• Unlock: The door is unlocked.

If this is any other DO, the states are:

• Active: The digital output is in the Active state defined on the Digital Output Form.

• Inactive: The digital output is NOT in the Active state.

Status Tab

Digital Video Recorder Form

Perform a search, select a DVR from the right pane of this form window, and click Status. The DVR must

be online in order to display a Status pane conveying the following information about the selected DVR:

• General Status: Current time, time powered on, MUX firmware, PPC firmware, and disk

capacity.

• Camera Status: Current in alarms and current in video loss alarms.

• Record Status: Record status, disk status, time recording, and time until disk is full.

• Archiving Status: Archive status, device status, time archiving, and time until archive is full.

• Ethernet Status: Normal connect IP address and connect priority, and live connect IP

address and connect priority.

 A duplex recorder priority status displays on a line separate from the IP address.

 A Triplex and/or Matrix recorder priority status displays as the last entry of the IP address

such as: 003.018.146.159/3

Click Status to refresh or update changes that occurred since the last Status request.

1 2 ... 249 250 251 252 253 254 255 256 257 258 259 ... 268 269

Comments to this Manuals

No comments

GE V6 User Manual Page 254

Comments to this Manuals

Related products and manuals for Software GE V6