GE V6 User Manual download pdf (Page 201)

Secure Perfect 6.1.1 User Manual 199

Micro Definition Tab

Micro Form

Configure your system with forethought. You will need to designate a physical address for your micro

before you create a definition.

This tab contains the basic information on the micro, such as its address and connection type. When

configuring a micro, COMPLETE THIS TAB FIRST. Other tabs display, depending on the selections you

make on this form.

Upon creation, the micro is offline. Before the host will communicate with the micro, you must change it to

online using the Micro Utility Form. You will not see any badge or alarm transactions until this is done.

Element Description

Micro

Address

Enter a number from 1 to 9999 maximum.

When micro records are created, the default value is in the format:

mmmm-b-pp Board Type where mmmm represents the micro number to

which a reader is associated, b represents the board number, pp

represents the point or device number, and Board Type is the type of

reader board.

Example:

0001-1-01 Reader

Micro Type

Select the micro you are configuring from the drop-down list. Secure

Perfect operates with the following micro types:

• Micro/5-PX (supports 16 readers) for direct serial and remote dial-

up modem communications links.

• Micro/5-PXN (supports 16 readers) for 10/100Mb Ethernet

communications links. May also be used for direct serial and remote

dialup modem communication links.

• Micro/PX-2000 (supports 4 readers) for direct serial and remote

dial-up modem communications links.

• Micro/PXN-2000 (supports 4 readers) for 10/100Mb Ethernet

communications links. May also be used for direct serial and remote

dialup modem communication links.

• MicroPXNPlus (supports 16 readers) for 10/100Mb Ethernet

communications links. May also be used for direct serial and remote

dialup modem communication links.

• MicroPXNPlus2000 (supports 4 readers) for 10/100Mb Ethernet

communications links. May also be used for direct serial and remote

dialup modem communication links.

When you make a selection, the appropriate fields become available for

the selected type.

Head of Line

Once you have connected the first micro to the host, this micro is the

Head-of-Line in a string of micros.

• Select Yes if you are configuring the first micro connected to the

host.

• If you select No, you must also select a head-of-line micro from the

drop-down list.

A MicroPXNPlus or MicroPXNPlus2000 must be a head-of-line micro to

take advantage of the Web Integrated Configuration Tool for flashing the

firmware.

If this is a new board, the network settings are set as the default. Open a

browser window such as IE, enter the micro IP address (such as

http\\192.168.6.6) and click Go. Firmware download begins.

• If a MicroPXNPlus or MicroPXNPlus2000 is downstream, you must

use eFlash to download firmware to any micro.

1 2 ... 196 197 198 199 200 201 202 203 204 205 206 ... 268 269

Comments to this Manuals

No comments

GE V6 User Manual Page 201

Comments to this Manuals

Related products and manuals for Software GE V6