GE V6 User Manual download pdf (Page 144)

Secure Perfect 6.1.1 User Manual 142

Digital Output Tab

Digital Input Form

This tab is available only if you have selected Digital Output in the Type field on the Digital Input Tab. Use

this tab to link digital outputs to a digital input. When this digital input is activated, the digital output is also

triggered.

Output A (Primary/Local: A primary input assignment is not required. The default is None. Click the

drop-down list to select an available DO to assign as the primary. If you select an output, this output must

belong to the local micro. If the micro is offline or unable to communicate with the host at the time of an

alarm, only the Primary/Local DO is triggered.

If the ON time on the Digital Output Form is set to 00, this DO will remain active until the digital input is

reset.

Output B:

Click the drop-down list to select an available DO. The digital outputs in this list can be on a local micro or

other micros. Output B will be activated only if the host is online and able to communicate with other

micros.

Digital Output Tab

Digital Output Form

Use this tab to schedule when the digital outputs in the group are in the active state and for the specified

length of time.

Micro

This is a read-only field. Displays the description of the micro on which this digital output is located.

Board

This is a read-only field. When the records are created, the default value is in the format: mmmm-b Board

Type where mmmm represents the micro number to which this reader is associated, b represents the

board number, and Board Type is the type of reader board, such as 16DO.

Example: 0001-1 16DO would be the digital output on micro one, 16DO board one.

Number

This is a read-only field. Displays the number of the digital output.

Active state

On/Off: Defines whether the digital output will be turned On or Off when the digital output is activated.

Contact your installer on how the digital output was wired. This determines the active state of the digital

output.

On time: Specifies the length of time the digital output will remain in the active state before going

inactive. This time may be overridden by the manual control buttons. If you enter 0 and this is:

• Output A, then the digital output will reset when the alarm resets.

• Output B, then the digital output will remain on until it is manually turned off or scheduled off.

When a micro is reset or the database is reloaded, all schedules from midnight to present time will run

EXCEPT for schedules that have a DO On time NOT equal to zero and were set to occur prior to the

current time. For example, you have created a schedule to occur at 8:00 am to turn a digital output into

the active state for 1 minute. At 10:00 am, the database for the micro is downloaded. During the

download process all schedules from Midnight to the current time (10:00 am) are re-run. Your schedule

for the DO will not run since it started and ended before the current time of 10:00 am.

1 2 ... 139 140 141 142 143 144 145 146 147 148 149 ... 268 269

Comments to this Manuals

No comments

GE V6 User Manual Page 144

Comments to this Manuals

Related products and manuals for Software GE V6