GE V6 User Manual download pdf (Page 46)

Secure Perfect 6.1.1 User Manual 44

Description

When the records are created, the default description is in the format: mmmm-b-pp where mmmm

represents the micro number to which this digital input is associated, b represents the board number, and

pp represents the point or device number.

Example: 0001-1-01 DI

This digital input is on micro 1, board 1, point 1. To change or add to this description, enter text over the

existing text and save the record. It is recommended that you keep the mmmm-b-pp prefix in each digital

input displayed to aid in locating the alarm points on the physical hardware. This field accepts a

maximum of 64 characters.

Facility

A facility can be assigned for the new Digital Input record from the Facility drop-down list.

The same facility is assigned for all devices associated with the micro when a micro is created.

Be very careful when assigning the facility of a DI to a different facility than the micro. You can

create an undesired result if you do not fully understand facility assignment.

Digital Outputs

Digital Output Form

Reference Topics:

Digital Output Tab

Schedule Tab

Manual Control Tab

Device Menu

A digital output represents an external device, such as lights, sirens and door strikes that may be

connected to the micro. Refer to your micro installation manual for information on how to connect a digital

output device to the micro. The digital outputs available depend on the micro setup and readers used.

Use the Digital Output Form to search and view or modify an existing digital output record.

For a shortcut menu to related forms, move the mouse pointer below any of the tabs and click the

right mouse button. If you are using this shortcut menu to get to the Schedules Form, all schedule

records will display.

Description

When the records are created, the default description is in the format: mmmm-b-pp where mmmm

represents the micro number to which this digital output is associated, b represents the board number,

and pp represents the point or device number.

Example: 0001-1-01 DO

This digital output is on micro 1, board 1, point 1. To change this description, type over the existing text

and save the record. It is recommended that you keep the mmm-b-pp prefix in each digital output

description displayed to aid in locating the alarm points on the physical hardware. This field accepts a

maximum of 32 characters.

Facility

A facility option can be assigned for your new Digital Output record from the Facility drop-down list.

Be very careful when assigning the facility of a digital output to a different facility than the micro.

You can create an undesired result if you do not fully understand facility assignment.

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 268 269

No comments

GE V6 User Manual Page 46