GE PFDS450 User Manual download pdf (Page 43)

Installation Instructions

REMOVE THE LEVELING LEGS

Carefully lay the washer or dryer on its side to

access the leveling legs on the bottom of the

appliance.

IMPORTANT: Do not lay the washer or dryer on its

back! Do not remove the shipping bolts on the back

side of the washer. The bolts must remain in place

until the washer is returned to an upright position.

Use an open-end wrench to remove the washer

or dryer leveling legs.

INSTALLATION PREPARATION

Remove the packaging.

The drawer divider is taped at the top of the shipping

carton. Remove the divider and set aside for final

installation.

Flatten the product carton to use as a pad to lay

the washer or dryer down on its side. Continue using

the carton to protect the finished floor in front of the

installation location.

CAUTION ³'XHWRWKHVL]HDQGZHLJKWRI

these products, and to reduce the risk of personal

injury or damage to the product, TWO PEOPLE ARE

REQUIRED FOR PROPER INSTALLATION.

INSTALLING THE PEDESTAL (if desired)

KIT CONTENTS

 4 Support pads



4 Mounting screws



Drawer divider

TOOLS YOU WILL NEED

 Phillips-head

screwdriver



9/16” Open-end

wrench or adjustable

wrench



7 mm Socket wrench

Back out and remove

all 4 leveling legs

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 155 156

No comments

GE PFDS450 User Manual Page 43