GE PFDS450 User Manual download pdf (Page 29)

WARNING – BEFORE PERFORMING

THIS EXHAUST INSTALLATION, BE SURE TO

DISCONNECT THE DRYER FROM ITS ELECTRICAL

SUPPLY. PROTECT YOUR HANDS AND ARMS

FROM SHARP EDGES WHEN WORKING INSIDE

THE CABINET. BE SURE TO WEAR GLOVES.

Installation Instructions

SIDE VENTING:

Dryer Exhaust to right of cabinet for Electric

models only.

Dryer Exhaust to left of cabinet for Gas and

Electric models.

Detach and remove the bottom, right or left side

knockout as desired. Remove the screw inside the

dryer exhaust duct and save. Pull the duct out of

the dryer.

Remove

screw

and save

Remove desired

knockout (one only)

Fixing hole

Cut the duct as shown and keep portion A.

TAB LOCATION

Bend tab

up 45°

Through the rear opening, locate the tab in the

middle of the appliance base. Lift the tab to about

45°,

using a flat-blade screwdriver.

ADDING A NEW DUCT

Reconnect the cut portion (A) of the duct to the

blower housing. Make sure that the shortened

duct is aligned with the tab in the base. Use the

screw saved previously to secure the duct in place

through the tab on the appliance base.

ADDING ELBOW AND DUCT FOR EXHAUST TO

LEFT OR RIGHT SIDE OF CABINET

• Insert the 4” elbow through the rear opening and

connect the elbow to the dryer internal duct.

•

Insert the 4” duct through the side opening and

connect it to the elbow.

CAUTION: Do not pull or damage the

electrical wires and do not remove the vinyl cover

from the electrical components inside the dryer

when inserting the duct. A slight interference may

occur between the exhaust and the wire

components.

Portion “A”

Left side

exhaust

Fixing hole

Internal duct

Not for gas

ø2”

Right

Left

Bottom

Rear opening

Side opening

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 155 156

Comments to this Manuals

No comments

GE PFDS450 User Manual Page 29

Comments to this Manuals

Related products and manuals for Electric laundry dryers GE PFDS450