GE PFDS450 User Manual Page 10

  • Download
  • Add to my manuals
  • Print
  • Page
    / 156
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 9
Built-In Rack Dry System
A handy drying rack may be used for drying items such as tennis shoes. Place items flat on the
drying rack and block such items as wool sweaters and delicate fabrics. Dry with low heat.
To install the Built-In Rack Dry System
1. Make sure the drum of the dryer is oriented so the rack drying system is on the left side of the
dryer.
2. Pull the drying rack screen out from the left side and engage the handle “posts” in the
opposite baffle slots.
3. Place the garment on the rack and close the door.
4. Press the DRYER RACK button.
5. Select desired time.
6. Press the START/PAUSE button.
NOTE:
Do not use this drying rack when there are other clothes in the dryer.
Make sure to detach the drying rack at the end of the cycle and fully retract the screen back
into the baffle.
Engage the handle posts
Settings
Under the SETTINGS option, you can
adjust the volume or the brightness of
the display.
VOLUME
End of Cycle (signal) volume can be set from
HIGH, MED, LOW or OFF.
Control Sounds volume can be set from
HIGH, MED, LOW or OFF.
DISPLAY BRIGHTNESS can be set from HIGH,
MED or LOW.
After you have made your selection, press
ENTER.
NOTE: To access the SETTINGS menu, hold
down the DRUM LIGHT button for 3 seconds.
About dryer features.
Drum Lamp
Before replacing the light bulb, be sure to unplug the dryer power cord or disconnect the dryer at
the household distribution panel by removing the fuse or switching off the circuit breaker. Reach
above dryer
opening from inside the drum. Remove the
bulb and replace with the same size bulb.
About cycle options.
NOTE: Not all features are available on all dryer models.
DRUM
LIGHT
SETTINGS
Press & hold for 3
seconds for secondary
options
10
Page view 9
1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 155 156

Comments to this Manuals

No comments