GE PT925 User Manual download pdf (Page 36)

– 36 –

7. Carefully pull, then lower the broiler element

towards the front of the oven to remove.

Bake Element

The upper bake element is rated at 1700 watts, and

the lower element is rated at 2200 watts.

The bake element terminals are located behind the

main rear access panel.

To remove the bake element:

Remove the main rear access panel. (See 1.

Rear

Access Panels.

)

IMPORTANT: The lower wattage elements use

3/16-in. terminal connections. The higher wattage

elements use 1/4-in. terminal connections.

2. Disconnect the wires from the bake element.

Disconnect

4. Carefully pull the bake element out through the

front of the oven.

Convection Fan Blade

The convection fan blade is located on the back wall

of the oven cavity and is removed separately from

the convection fan motor.

To remove the convection fan blade:

Remove the oven racks.1.

Remove the four 1/4-in. hex-head screws that 2.

hold the convection cover to the back wall of the

oven cavity.

3. The fan blade is attached to the motor shaft

with a reverse-threaded 1/2-in. hex-nut. Turn

the nut clockwise to remove.

4. Remove the three 1/4-in. hex-head screws

that attach the broiler element to the oven

cavity.

5. Carefully pull out the sensor approximately 2

inches from the broiler element bracket.

6. Remove the four 1/4-in. hex-head screws that

attach the broil element to the top of the oven.

3. Remove the two 1/4-in hex-head screws that

hold the bake element to the back of the oven.

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 61 62

No comments

GE PT925 User Manual Page 36