GE PT925 User Manual download pdf (Page 39)

– 39 –

Strip Circuit

To remove the lock assembly:

Remove the main rear access panel. (See 1.

Rear

Access Panels.)

Remove the two T15 Torx screws from the front 2.

of the oven that secure the lock assembly in

place.

J17-Pin9

J16

UNLOCKED

Disconnect

Lock Assembly

4. Slide the lock assembly through the channel and

out through the back of the oven.

3. Disconnect the motor and switch wiring

harnesses from the lock assembly.

Thermal Cut Outs

When either of the 2 thermal cut outs are open, L2 is

cut off from the oven.

The thermal cut outs are rated at:

Upper oven TCO = 177°C/350°F•

Lower oven TCO = 150°C/302°F•

To remove the thermal cut outs:

Remove the main rear access panel. (See 1.

Rear

Access Panels.)

Disconnect the wires, and remove the two 1/4-2.

in. hex-head screws that attach the thermal

switch to the oven.

Upper Oven Thermal Cut Out

Lower Oven Thermal Cut Out

Disconnect

1 ... 38 39 40 ... 62

No comments

GE PT925 User Manual Page 39