GE JM250DFWW Installation Manual download pdf (Page 18)

Using the self-cleaning oven.

The oven door must be closed and all controls must be set correctly for the cycle to work properly.

How to Delay the Start of Cleaning

Make sure the clock shows the correct time of

day.

Press the SELF CLEAN pad.

Using the INCREASE or DECREASE pads,

enter the desired clean time.

Press the DELAY START pad. The earliest

start time you can set will appear in the

display.

Using the INCREASE or DECREASE pads,

enter the time of day you want the clean

cycle to start.

Press the START pad.

The door locks automatically. The display will

show the start time. It will not be possible to

open the oven door until the temperature

drops below the lock temperature and the

LOCKED DOOR light goes off.

The oven shuts off automatically when the

clean cycle is complete.

When the LOCKED DOOR light is off, open the

door.

After a Clean Cycle

You may notice some white ash in the oven.

Wipe it up with a damp cloth after the oven

cools.

If white spots remain, remove them with a

soap-filled steel wool pad and rinse thoroughly

with a vinegar and water mixture.

These deposits are usually a salt residue that

cannot be removed by the clean cycle.

If the oven is not clean after one clean cycle,

repeat the cycle.



You cannot set the oven for cooking until the

oven is cool enough for the door to unlock.

 While the oven is self-cleaning, you can press

the CLOCK pad to display the time of day.

To return to the clean countdown, press the

COOKING TIME pad.

 If the racks become hard to slide, apply a

small amount of vegetable oil or cooking oil

to a paper towel and wipe the edges of the

oven racks with the paper towel.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 27 28

Comments to this Manuals

No comments

GE JM250DFWW Installation Manual Page 18

Comments to this Manuals

Related products and manuals for Unknown GE JM250DFWW