GE Simon Security System User Manual download pdf (Page 21)

Simon Security System 13

Note

For any keypress on the

Keychain Touchpad, hold

the button until the indicator

light blinks.

LOCK Press once to arm doors and windows.

LOCK Press twice to arm doors, windows, and Motion Sensors.

LOCK Press 3 times to arm doors, windows, Motion Sensors, and to acti-

vate the Latchkey option.

LOCK and UNLOCK

Press both buttons simultaneously for 3 seconds to send a panic (intru-

sion, silent, or non-medical emergency) alarm to the central monitoring

station. Check with the installer to find out how the keychain touchpad

panic buttons will operate

Note

Panic alarms need to be

silenced from the panel, a

remote handheld touchpad

or another keychain touch-

pad. They cannot be

silenced from the same key-

chain that activated the

alarm.

UNLOCK Press to disarm your security system.

STAR Can be programmed to control a device connected to a Universal

Module.

LIGHT Can be programmed to control a device connected to a Lamp Mod-

ule. One press all lights on Lamp Modules turn on. Press again all lights turn

off.

Using a

Computer

With a Ethernet Interface module installed in your panel, you can control your system

via the premisesconnect.com website.

Premisesconnect.com can be used by:

• Installers - to aid in installation and maintenance of security systems.

• Dealers - to simplify customer and account management.

• First Responders - to identify where and how to respond.

• Customers - to control their security system.

For more information on controlling your system via a computer, visit premisescon-

nect.com.

RF Thermostat

Operation

These guidelines must be followed for RF Thermostat operation:

• The panel needs to be armed to Doors & Windows and Motion Sensors to enter

Energy Saving Mode.

• If there are no Motion Sensors in the system, the Motion Sensors button must still

be pressed.

• Both Option 81 and 82 can be turned on at the same time.

• Thermostat has to be in Auto Mode for Options 81 and 82 to work correctly.

• When the panel is disarmed the thermostat returns to normal operating mode.

Programming

Your System

The programming decals are visible when you open the panel cover (see below).

These decals are designed to make system programming easier for you. Always begin

by entering your master access code. Then, choose an operation from the START

MENU. Follow the prompts and flow arrows to complete the desired task. Notice the

button flow diagrams following the Instruction Summary.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 39 40

Comments to this Manuals

No comments

GE Simon Security System User Manual Page 21

Comments to this Manuals

Related products and manuals for Security access control systems GE Simon Security System