GE Simon Security System User Manual download pdf (Page 16)

Simon Security System

EMERGENCY

Press FIRE, POLICE, or AUX for 2 seconds (or press twice quickly) to call the central

monitoring station and notify them of a non-medical call for help.

How Your

System

Communicates

to You

Your system responds to you through the use of panel voice messages, status beeps,

alarms, panel indicator lights, and to a numeric pager or remote phone if programmed.

Panel Voice Messages

When you press the buttons on the panel or the touchpads, the panel responds with

voice messages. Panel voice can be enabled or disabled (see “Options”).

Note

The panel will not give voice

messages during an AVM

session. Talk to your security

system dealer to see if your

panel has the AVM option.

These messages may respond with system information or prompt you to take further

action. For example, if you want to disarm the system and you press the DISARM but-

ton, the panel responds by announcing, “Please enter your access code.”

If you press a button and the feature has not been programmed, the panel voice will

respond with “Function not available.” An example of this would be pressing Lights

Sensor (activated) button when you have no sensor activated lights in your system.

Status Beeps

Note

You may receive a different

number of status beeps if

buttons are pressed quickly

Status beeps are used to indicate key presses, status, and problems with the system.

They can be enabled or disabled (see “Options”). The following table describes status

beep activity.

E M E R G E N C Y

A U X

P O L I C EF I R E

Status Beeps

Activity Beep Response

ARM Doors & Windows Exit delay and Entry delay beeps sound 2 times

every 5 seconds and 2 times per second during

the last 10 seconds (if Silent Exit is used, the Exit

delay beeps will only sound twice when you arm

and twice when the Exit delay expires)

ARM Motion Sensors Exit delay and Entry delay beeps sound 3 times

every 5 seconds and 3 times per second during

the last 10 seconds (if Silent Exit is used, the Exit

delay beeps will only sound 3 times when you arm

and 3 times when the Exit delay expires)

ARM Doors/Windows &

Motion Sensors

Exit delay and Entry delay beeps sound 4 times

every 5 seconds and 4 times per second during

the last 10 seconds (if Silent Exit is used, the Exit

delay beeps will only sound 4 times when you arm

and 4 times when the Exit delay expires)

DISARM 1 beep

CHIME DOORS 2 beeps (feature must be programmed by installer)

CHIME SPECIAL MOTION 3 beeps (feature must be programmed by installer)

Trouble Beeps 6 beeps every minute. Press the SYSTEM STA-

TUS button to stop beeps for 4 hours

No Activity Beeps 20 beeps every minute for 5 minutes (feature must

be programmed by the installer)

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 39 40

Comments to this Manuals

No comments

GE Simon Security System User Manual Page 16

Comments to this Manuals

Related products and manuals for Security access control systems GE Simon Security System