GE IM4A User Manual download pdf (Page 15)

Installation Instructions

INSTALL THE ICE BUCKET

Place the ice bucket (9) under the icemaker.

Make sure the icemaker power switch is in the

O (off) position.

ATTACH WARRANTY LABEL

A label (7) is provided with this kit to record the

date of installation for warranty purposes. Apply it

to the back of the refrigerator.

KEEP THIS MANUAL

The warranty for the icemaker is printed in this

manual. Keep this manual with your Refrigerator

Owner’s Manual.

The icemaker installation inside the freezer is now

complete. Continue to the Water Valve Assembly

section.

MOUNT THE ICEMAKER

• Lift the icemaker so the fill tube (13) or fill tube

extension (8) (depending on model) fits in the

fill cup opening (D). Hang the icemaker on the

two mounting screws (B).

Make sure:

• The power cord is still firmly in the socket.

• The fill tube (13) or fill tube extension (8)

extends into the fill cup opening at the back of

the icemaker. (Check the rear of the refrigerator

to make sure the fill tube has not been pushed

out of the back of the refrigerator).

• The icemaker mounting screws are located in

the uppermost position of the mounting slots.

• The icemaker is level.

THEN SECURELY TIGHTEN THE ICEMAKER

MOUNTING SCREWS.

INSTALL FILL TUBE EXTENSION

For models with one temperature control

(refrigerator) only:

• Cut the fill tube extension (8) to the length

(refer to the template on page 42) with a

sharp knife or a single-edge razor blade and slide

it onto the fill tube against the stop.

SET POWER SWITCH TO O (off)

Set the icemaker power switch to O (off). Leave

the power switch in the O (off) position until the

refrigerator is connected to the water supply to

prevent premature operation.

Power

Switch

INSTALL THE ICEMAKER FILL CUP

Install the icemaker fill cup (side-mounted) (15)

into the icemaker as shown.

PLUG IN THE ICEMAKER

Holding the icemaker in place, insert the icemaker

power cord plug into the socket on the side or rear

wall (depending on model),

making sure the prongs

and holes are matched.

Press the plug firmly

into the socket. Lock the

plug in place by clipping

the restraints onto each

side of the plug. Make

sure the restraints click into

place. Make sure the power

cord is still in the hook on

the back of the icemaker.

Hook

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 135 136

Comments to this Manuals

No comments

GE IM4A User Manual Page 15

Comments to this Manuals

Related products and manuals for Fridges GE IM4A