GE IM4A User Manual download pdf (Page 30)

Installation Instructions

ICEMAKER INSTALLATION INSTRUCTIONS R

BEFORE YOU BEGIN

Read each step thoroughly before proceeding.

•

CAUTION – Unplug the

Refrigerator. To eliminate the danger

of electric shock during installation,

you must unplug the refrigerator from

its electrical outlet.

Flat blade and Phillips

screwdrivers

Pliers

TOOLS YOU WILL NEED

Sharp knife

Ice bucket

Part No. WR30S1

Icemaker mounting block

Part No. WR2M3604

PARTS REQUIRED THAT CAME

WITH THE REFRIGERATOR

Are these the right instructions for your model? Follow the Installation Instructions indicated by

the label on the back of the refrigerator--- or

SRQPNML

INSTALL FILL TUBE

• Cut the fill tube (13) to the

length (refer to the template

on page 42) with a sharp knife

or a single-edge razor blade.

• Slide the fill tube (13) onto the

water tube inlet (12).

• Go to the back of the refrigerator.

Remove the label covering the

hole. Pull out the insulation plug

and any debris.

• On the tube side of the water

tube inlet (12), there is an

adhesive backing. Remove the

adhesive backing and slide the

tube into the hole at the back of

the refrigerator. Firmly press on the inlet to secure

it to the refrigerator.

PREPARE FOR INSTALLATION

• Remove all freezer baskets for greater accessibility

to the rear of the freezer.

• Remove and discard

the large white plug

from the rear freezer

wall. Pull out the gray

insulation plug and

remove any debris.

• Remove the outlet cover

with a flat-blade screwdriver.

Power

Switch

Phillips head

screws (2)

Part No. WR1M478

SET POWER SWITCH TO O (off)

Set the icemaker power switch to O (off). Leave

the power switch in the O (off) position until the

refrigerator is connected to the water supply to

prevent premature operation.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 135 136

Comments to this Manuals

No comments

GE IM4A User Manual Page 30

Comments to this Manuals

Related products and manuals for Fridges GE IM4A