GE JVM2052 User Manual download pdf (Page 17)

Installation Instructions

Attach the exhaust adapter to the rear of the

oven by sliding it into the guides at the top

center of the back of the oven.

ADAPT MICROWAVE OVEN

BLOWER FOR OUTSIDE BACK

EXHAUST (cont.)

WARNING: Risk of electric shock

can cause injury or death. Do not pull or stretch

the blower unit wiring. Make sure the wires

are not pinched.

NOTE: The blower unit exhaust openings should

match exhaust openings on rear of microwave oven.

Push in securely until it is in the lower locking

tabs. Take care to ensure that the damper hinge

is installed so that it is at the top and that the

damper swings freely.

Guide

Adapter

Locking Tabs

Back of

Microwave Oven

BEFORE: Fan Blade

Openings Facing Up

End B

End A

Carefully pull out the blower unit. The wires

will extend far enough to allow you to adjust

the blower unit.

Rotate the unit so that the exhaust ports face

the rear of the cabinet. When you insert the blower

unit, the blower wire must be as shown.

Place the blower unit back into the cabinet.

Check that the exhaust ports face toward

the rear of the cabinet.

Exhaust ports

Blower unit

Exhaust ports

Back plate

Blower unit

mounting screw

(2 screws)

Blower plate

mounting screw

(3 screws)

Blower plate

Blower unit

Blower unit exhaust ports

Reattach the blower plate to the cabinet so

the exhaust ports and blower plate opening

are aligned. Attach with 2 blower unit mounting

screws and then 3 blower plate mounting screws.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 23 24

Comments to this Manuals

No comments

GE JVM2052 User Manual Page 17

Comments to this Manuals

Related products and manuals for Ovens GE JVM2052