Ge CGS990SETSS User Manual download pdf (Page 40)

Installation Instructions

DIMENSIONS AND CLEARANCE

Provide adequate clearances between the range and adjacent combustible surfaces. These dimensions must be met for

safe use of your range. The location of the electrical outlet and pipe opening (see Gas Pipe and Electric Outlet Locations)

may be adjusted to meet specific requirements.

The range may be placed with 0" clearance (flush) at the back wall. (Some models will not fit flush.)

For island installation, Model CGS990, maintain 2-1/2 in. minimum from cutout to back edge of countertop and 3 in.

minimum from cutout to side edges of countertop.

*Models PGB900,

PGB910, PGB915,

PGB930 and PGB935

require only 3"

minimum clearance

to left wall. „ „„

18"

Minimum to

cabinets on

either side

of the range

‘ 30"

30"

Maximum

depth for

cabinets above

countertops

<-0"

To cabinets below cooktop

and at the range back

(Some models will not have

0" clearance.)

**Dimension are referenced from the point at

the back of the range that will contact the rear wall first.

Max dimension should be considered between the upper

and lower doors.

' Heightto backguard based on Café style backguard kit installed.

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 113 114

No comments

Ge CGS990SETSS User Manual Page 40