Ge CGS990SETSS User Manual download pdf (Page 27)

Using the self-cleaning upper and lower ovens.

GEAppliances.com

The oven door must be closed and all controls set correctly for the cycle to work properly.

Wipe up heavy soil on the oven

bottom.

DO NOT hand

DO hand clean

inside door Ararne

Before a Clean Cycle

For the first self-clean cycle, we recommend

venting your kitchen with an open window

or using a ventilation fan or hood.

Remove any broiler pan, broiler grid, all

cookware, probe and any aluminum foil

from the oven—they cannot withstand the high

cleaning temperatures.

NOTE:

■ If your oven is equipped with nickel

oven racks, remove them before you begin

the self-clean cycle.

■ If your oven is equipped with gray porcelain-

coated oven racks, they may be left in the

oven during the self-clean cycle.

Soil on the front frame of the range and

outside the gasket on the front frame will

need to be cleaned by hand. Clean these

areas with hot water, soap-filled scouring

pads or cleansers such as Soft Scrub®? Rinse

well with clean water and dry. Wipe off

the flat inner door with soapy water and a

sponge.

Do not clean the gasket. The fiberglass

material of the front frame gasket cannot

withstand abrasion. It is essential for the gasket

to remain intact. If you notice it becoming worn

or frayed, replace it.

Wipe up any heavy spillovers on the oven

bottom.

Make sure the oven light bulb cover is in place

and the oven light is off.

IMPORTANT: The health of some birds

is extremely sensitive to the fumes given

off during the self-cleaning cycle of any range.

Move birds to another well-ventilated room.

NOTE: Use caution when opening the upper

and lower oven after the self-clean cycle has

ended. The oven may still be hot.

NOTES:

■ The surface burners must

be turened off prior to the

self-clean start time

■ Both ovens cannot be self-

cleaned at the same time.

■ Cooktop burners and the oven

not in self-clean mode will not

start during self-clean cycle.

How to Set the Upper Oven for Cleaning

The oven door must be closed and all controls ^

set correctly for the cycle to work.

|~^ Rotate upper oven knob to self-clean

position.

Touch the Sfort’pad.

Doors will lock automatically. The display will

show the clean time remaining. If the upper

door is not locked and remaining clean time

is not displayed, within 1 minute of initiating

the cycle rotate the knob to the Offpositioin

and open both doors for 10 minutes. Repeat

step 1. It will not be possible to open the oven

door until the temperature drops below the

lock temperature and the LOCKED DOOR light

goes off.

The oven shuts off automatically when the

clean cycle is complete.

When the LOCKED DOOR light is off, the

door will unlock automatically.

/f\ Rotate knob to the off position

■ The words LOCK DOOR will flash and the

oven control will signal if you set the clean

cycle and forget to close the oven door.

■ To stop a clean cycle, touch the Clear/Off

pad then turn the oven control knob to the

OFF position. After some period of time, the

LOCKED DOOR light will go off. This will

indicate that the oven has cooled below

the locking temperature and gas is able to

flow to the cooktop. The doors will unlock

automatically.

■ After you complete the first oven clean cycle,

you can start the second oven clean cycle.

27

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 113 114

Comments to this Manuals

No comments