GE 27957 User Manual download pdf (Page 9)

Important Installation Guidelines

• Install telephone near both a telephone (modular) jack and an electrical

power outlet.

• Avoid sources of noise, such as a window by a busy street, and electrical

noise, such as motors, microwave ovens, and ﬂuorescent lighting.

• Avoid heat sources, such as heating air ducts, heating appliances,

radiators, and direct sunlight.

• Avoid areas of excessive moisture or extremely low temperature.

• Avoid dusty locations.

• Avoid other cordless telephones or personal computers.

Installing the Phone

Choose the best location to install your base and handset charge cradle.

Your base and handset charge cradle should be placed on a level surface

such as a desk or table top, or you may mount the base on a wall.

Installing the Handset Battery

NOTE: You must connect the handset battery before use.

1. Locate battery and battery door which are packaged together inside a

plastic bag and are separate from the handset.

2. Locate the battery compartment on the back of the handset.

3. Plug the battery pack cord into the jack inside the compartment.

NOTE: It is important to maintain the polarity (black and red wires) to

the jack inside the compartment. To ensure proper battery installation, the

connector is keyed and can be inserted only one way.

4. Insert the battery pack.

5. Close the battery compartment

by pushing the door up until it

snaps into place.

6. Place the handset in the

charging cradle.

RED WIRE

BLACK WIRE

BATTERY

PRESS DOWN

FIRMLY

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 99 100

No comments

GE 27957 User Manual Page 9