GE 27957 User Manual download pdf (Page 15)

NOTE: If you aren’t sure which dialing system you have, set the telephone to

tone dialing and make a test call. If the call connects, the setting is correct. If

the call does not connect, set the telephone to pulse dialing.

Setting Day/Time

NOTE: This setting may only be made with the base.

Time is transmitted automatically by your local phone company as part of

Caller ID service. If you are subscribed to Caller ID service, the current time is

set automatically when you receive your ﬁrst CID call. Otherwise, you can set

the time manually. The day of week is not set automatically by Caller ID. The

day of week must be set manually through base.

1. Press the FLASH/PROGRAM button until SET DAY shows in the display.

Monday is the default setting.

2. Use the REVIEW or NEXT button to select the current day.

3. Press FLASH/PROGRAM until SET TIME shows on the display. 12:00 AM

the default setting.

4. Use the touch-tone pad to enter the ﬁrst digit of the hour, then enter the

second digit of the hour, the ﬁrst digit of the minute, and the second digit

of the minute.

5. Use the REVIEW or NEXT button to scroll to

AM or PM.

6. Press FLASH/PROGRAM again to store your selection.

Local Area Code

NOTE:

This setting may be made on both the base and the cordless handset,

independent of each other.

1. Press the FLASH/PROGRAM button until SET AREA CODE - - - or AREA

CODE - - - shows in the display. - - - is the default setting.

2. Use the cordless handset or base number pad to enter your three digit

area code.

NOTE: If you make a mistake, press the DELETE button to erase a wrong

number.

3. Press FLASH/PROGRAM again to store your selection.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 99 100

No comments

GE 27957 User Manual Page 15