GE 27957 User Manual download pdf (Page 34)

Call Waiting Caller ID

Provided you subscribe to Caller ID with Call Waiting service from your

phone company, you may see who is calling when you hear the call waiting

tone in the receiver. The CID information appears in the display after you

hear the tone.

Press FLASH/PROGRAM to put the current call on hold and answer the

incoming call. Press FLASH/PROGRAM again when you want to return to

the ﬁrst call.

IMPORTANT: In order to use all of the features of this unit, you must

subscribe to either the standard Name/Number Caller ID Service or Call

Waiting Caller ID Service. To know who is calling while you are on the phone,

you must subscribe to Call Waiting Caller ID Service.

Answering System Set Up

This section shows you how to set up your answering system to receive

incoming calls. Before you begin the setup, you must turn on the answering

system.

• Press the ANSWERER ON/OFF button to turn the answering system

on and off. The new messages indicator ﬂashes when you have new

messages.

NOTE: The display shows “ANSWERER OFF ” when the answering system is off.

The default status is on.

Voice Instructions

If you need additional assistance, press the MEMO button on the base and

follow the voice instructions.

Answering System Operation

Recording the Outgoing Announcement

For best results when recording, you should be about nine inches from the

microphone, and eliminate as much background noise as possible.

1. Make sure the answering system is

ON.

2. Press and hold the ANNOUNCE button on the base while you record

the announcement.

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 99 100

No comments

GE 27957 User Manual Page 34