GE NX-8V2 User Manual download pdf (Page 16)

NX-8V2 Control

Segment 2:

1 = On enables the LED Extinguish feature.

2 = On enables the Require Code for Bypassing feature.

3 = On enables the Zone Bypassed Sounder Alert feature.

4 = On enables the AC Power/Low Battery Sounder Alert feature.

5 = On enables Bypass toggle.

6 = On enables Silent Auto Arm.

7 = On enables the Automatic Instant feature.

8 = On enables Instant mode toggle. (Applies to NX-1208E / NX-1248E keypads)

Segment 3:

1 = On enables Opening and Closing reports.

2 = On enables Zone Bypass reporting.

3 = On enables Zone Restore reporting.

4 = On enables Zone Trouble reporting.

5 = On enables Zone Tamper reporting.

6 = On enables the Cancel reporting.

7 = On enables the Recent Closing report.

8 = On enables the Exit Error report.

Segment 4:

1 = On enables Late to Close / Early to Open.

2 = On enables Auto Arm in Stay Mode.

3 = On disables the door delays in Night mode. (Applies to NX-1208E / NX-1248E keypads)

4 = On disables the bypass for Force Arm zones.

Segment 5: Reserved

L 24 ENTRY / EXIT TIMERS 6 ............ numerical

Location 24 is used to program the Entry/Exit times. There are 2 separate Entry/Exit times.

Segment 1, Entry time 1: This is the entry time that will be used when a delay 1 zone type initiates an entry delay. Valid

entries are 30-255 seconds.

Segment 2, Exit time 1: This is the exit time that will be used for all zones designated as delay 1. Valid entries are 45-255

seconds.

Segment 3, Entry time 2: This is the entry time that will be used when a delay 2 zone type initiates an entry delay. Valid

entries are 30-255 seconds.

Segment 4, Exit time 2: This is the exit time that will be used for all zones designated as delay 2. Valid entries are 45-255

seconds.

Segments 5 & 6 Reserved.

XIII. DEFAULT ZONE TYPES (Configurations)

Zones can be programmed to be one of thirty different zone types (configurations). Zone types 17 - 20 can be used for wireless or

hardwired zones using European double EOL configuration. The default zone types are listed below. These zone types can be

customized by programming locations 110-169.

DATA DESCRIPTION OF DEFAULT ZONE TYPES

1 DAY ZONE - Instant when system is armed trouble zone when system is disarmed.

2 24-HOUR AUDIBLE - Creates an instant yelping siren alarm regardless of the armed state of the control panel.

ENTRY/EXIT DELAY 1- A trip will start entry delay 1. The lack of a trip during exit delay will enable the Automatic

Bypass or Instant mode if so programmed.

FOLLOWER WITH AUTO- BYPASS DISABLED - This zone will be instant when the system is armed and no entry or

exit delays are being timed. It is delayed during entry and exit delay 1 times. This zone will not automatically bypass even

if enabled in Segment 1 of Location 23.

INTERIOR FOLLOWER WITH AUTO- BYPASS ENABLED - This zone will be instant when the system is armed and no

entry or exit delay is being timed. It is delayed during entry and exit delay 1 times. This zone will automatically bypass if

enabled in Segment 1 of Location 23.

6 INSTANT - This zone creates an instant alarm whenever it is tripped and the Armed LED is on.

24-HOUR SILENT - Creates an instant silent alarm regardless of the armed state of the control panel. It will not display

on the keypad.

FIRE - This zone will light the Fire LED and sound the temporal siren each time the zone is shorted. It will also rapidly

flash the Fire LED indicating a trouble if the zone is open.

ENTRY/EXIT DELAY 2- A trip will start entry delay 2. The lack of a trip during exit delay will enable the Automatic

Bypass or Instant mode if so programmed.

24-HOUR SILENT SUPERVISED- Creates an instant silent alarm regardless of the armed state of the control panel. It

will display on the keypad.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 59 60

Comments to this Manuals

No comments

GE NX-8V2 User Manual Page 16

Comments to this Manuals

Related products and manuals for Security access control systems GE NX-8V2