Ge 1000 User Manual download pdf (Page 10)

Security Pro 1000

Quick Exit

Note

The designated door may be

opened and closed once. If

you close the designated

door behind you when you

exit, you will have to disarm

the system upon reentering.

Leave the designated door

open while using the Quick

Exit feature.

The Quick Exit feature is used when someone wants to briefly leave while the home is

still armed (i.e. get the newspaper). This feature needs to be enabled by your installer.

When you press the Disarm button the panel will announce exit time on. This will allow

a designated exit door to be open for up to 2 minutes without triggering an alarm.

Latchkey

Latchkey is used to notify parents, via a numeric pager, if children do not arrive home at

a predetermined time and disarm the system. For example, you set the Latchkey time

for 3:00 pm. If the system isn’t disarmed by that time a message is sent to your numeric

pager (see “Numeric Pager”).

Subdisarm

If your system includes 24-hour protection sensors on items such as gun or jewelry

cases, you must subdisarm the panel before accessing these areas to avoid causing an

alarm. Environmental sensors, such as smoke and carbon monoxide stay active at all

times.

¾

Arming Your System with Doors & Windows Closed

1. Close all doors and windows.

2. Press Arm Doors & Windows button.

3. Enter Access Code (if needed).

Panel announces, Doors and windows on, Arm Doors & Windows light will be lit and

the exit delay will begin.

¾

Arming Your System with Doors or Windows Open (Indirect Bypassing)

1. Close all doors and windows except the ones you wish to remain open.

2. Press Arm Doors & Windows button.

3. Enter Access Code (if needed).

Note

Any sensors that are

bypassed by the system will

NOT be protecting your

home.

Panel announces any protected doors or windows that are open. Any sensors that are

open when the system is armed will be bypassed automatically after exit. Arm Doors &

Windows light will be lit and the exit delay will begin.

¾

Arming Your System with No Entry Delay

Note

No Entry Delay can be used

in two ways. First, you can

use this feature when you’re

staying at home, after you’ve

armed the system (i.e. when

you’re asleep). Second, you

can use this when you’re

away from your home. To

avoid causing an alarm, you

must disarm the system with

a remote handheld touchpad

or keychain before entering

your home. Check with your

installer to find out how this

option is programmed.

1. Close all doors and windows.

2. Press Arm Doors & Windows button twice.

3. Enter Access Code (if needed).

Panel announces, Doors and windows on, no entry delay. Arm Doors & Windows light

will blink and the exit delay will begin.

¾

Arm Motion Sensors

1. Press Arm Motion Sensors button once.

2. Enter access code (if needed).

Note

This feature is most likely

used when there is no one

on the premises.

Panel announces, Motions on. Arm Motion Sensors light will be lit and the exit delay

will begin.

¾

Activate Latchkey Feature

1. Press the Arm Motion Sensors button twice.

2. Enter Access Code (if needed).

Panel announces, Motions on, Latchkey on. Arm Motion Sensors light will blink and

the exit delay will begin.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 35 36

Comments to this Manuals

No comments

Ge 1000 User Manual Page 10

Comments to this Manuals

Related products and manuals for Safety Ge 1000