GE DEH-211 User Manual download pdf (Page 18)

16 •

••

• Installing the Software CIMPLICITY PMCS Read-This-Book-First

Select the appropriate network adapter from the list and click Have Disk…. Follow

the instructions provided on the screen to complete the network card installation.

For PMCS systems using one or more GE Multilin RS232 to RS485 converters (or

equivalent), no additional drivers are required.

Ethernet PMCS Network Interfaces

If you are using an Ethernet interface card to connect to the PMCS network through

one or more Ethernet Gateways or directly to a network of Universal Relays (Modbus

TCP/IP), follow the manufacturer’s installation instructions and be sure to install the

provided Windows NT drivers using Control Panel>Network>Adapters>Add

Adapter. Refer to the screen shots above for an example, though the selections will

differ based on the hardware you are installing.

Ethernet requires the TCP/IP protocol for compatibility with the Ethernet Gateway or

Universal Relays. TCP/IP should have been installed with Windows NT Workstation

4.0; you can check this using Control Panel>Network>Protocols. The screen shot

below shows a system with TCP/IP installed. If TCP/IP is not installed on your

system, refer to the Windows NT documentation for installation instructions.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 68 69

No comments

GE DEH-211 User Manual Page 18