GE GXCF05D User Manual download pdf (Page 4)

IMPORTANT: Make sure the dispenser is

unplugged with both the hot and cold power

switches (on the back of the dispenser) set to the

0 (off) position. Before placing the water bottle on

the dispenser, wash hands and wipe the top of

the bottle with a clean cloth. Avoid touching the

part of the bottle that will be in contact with the

water dispenser.

Make sure the water level in the top of the

dispenser is low enough to allow for proper

bottle installation. Failure to do so may cause

the dispenser to overflow.

Sanitize the dispenser water tanks prior to

installing a full bottle of water for the first time

(see “Cleaning and Sanitizing the Water Tanks”).

1. If the water bottle has a cap, push the

center plug out of the cap and into the

bottle before placing on the dispenser.

2. Place the bottle on top of the dispenser as

shown and into the bottle support collar.

Install the bottle quickly to minimize spills.

3. IMPORTANT: Press the hot and cold dispenser

buttons until water runs from both taps.

4. Plug in the dispenser.

5. Set the HOT and COLD power switches

(located on the top left rear of the

dispenser) to the I (on) position.

6. Allow 30 minutes for water to reach hot and

cold temperatures.

Contact a local water bottle distributor to purchase

water bottles.

Loading the Dispenser

The HOT dispenser button is equipped with

a child safeguard that reduces the risk of hot

water being dispensed accidentally or by small

children. To use the button, slide the tab up

and press the button in.

The dispenser heats water to a temperature

of approximately 190°F (88°C). Water temperatures

above 125°F (52°C) can cause severe burns or

death from scalding. Children, the disabled and

the elderly are at highest risk of being scalded.

CAUTION: Children should be

supervised by a parent when using this product.

Child Safeguard

Using the water dispenser.

Child

safeguard tab

Bottle Support Collar (WS28X10012)

Separator (WS28X10013)

Cold Water Tank

Hot (Red) and Cold (Blue) Power Switches

(back of dispenser)

Indicator Lights

The green light will be lit when the dispenser is

plugged in. The red and blue lights will cycle on

and off while the dispenser heats and cools water.

Hot (Red) and Cold (Blue) Water Dispenser Buttons

Dispenser Drip Tray (WS28X10016) and

Grille (WS28X10015)

Storage Cabinet

Do not use to store foods requiring refrigeration.

The cabinet is not refrigerated.

Shelf (WS28X10014)

Drainage Cap (floor models) (WS01X10008)

Silicon Stopper (floor models) (WS01X10007)

Retaining Clip (countertop models) (WS01X10010)

Rubber Drain Cover (countertop models)

(WS01X10011)

Features and Parts List

GXCF05D

Floor model

GXCC01D

Countertop model

1 2 3 4 5 6 7 8 9 ... 23 24

Comments to this Manuals

No comments

GE GXCF05D User Manual Page 4

Comments to this Manuals

Related products and manuals for Water dispensers GE GXCF05D