GE GFDR480EFWW Use and Care Manual download pdf (Page 34)

34

Installation Instructions

REVERSING THE DOOR SWING (if desired)

RE-ASSEMBLE DOOR ASSEMBLY

6

A. Place the chrome door cover on a soft flat

surface with the plastic outer protect cover

facing down.

B. Lower the inner door frame onto the chrome

door cover.

C. Ensure that all screw holes are aligned and

re-install 10 screws (#8 x 7/8”).

RE-LOCATE HINGE PIN SCREW

7

A. Remove the hinge pin screw from the hole

labeled “D”.

RE-INSTALL DOOR ASSEMBLY

8

A. Install the door assembly by guiding the hinge

pin screw head through the key hole on the

front panel and lowering the door assembly into

place.

B. Open the door approximately 140 degrees to

provide access to the screw hole locations.

C. Starting with the top screw, re-install the 2

screws (#10 x 5/8”) which secure the door to the

front panel.

B. Re-install the hinge pin screw into the hole

labeled “W”.

1 ... 33 34 35 ... 144

Comments to this Manuals

No comments