GE GFDR480EFWW Use and Care Manual download pdf (Page 28)

EXHAUSTING THE DRYER (cont.)

NEVER LEAVE THE BACK OPENING WITHOUT THE

PLATE.

(Kit WE1M454.)

Installation Instructions

SIDE VENTING (cont.)

Connect standard metal elbows and ducts to

complete the exhaust system. Cover back opening

with a plate (Kit WE1M454) available from your

local service provider. Place dryer in final location.

ADDING COVER PLATE TO REAR OF CABINET

(SIDE EXHAUST)

ADDING ELBOW AND DUCT FOR EXHAUST TO

LEFT OR RIGHT SIDE OF CABINET (cont.)

Plate

(Kit WE1M454)

• Apply duct tape as

shown on the joint

between the dryer

internal duct and the

elbow, and also the joint

between the elbow and

the side duct.

Use 4” rigid metal ducting

only inside the dryer. Internal duct joints must be

secured with tape, otherwise they may separate

and cause a safety hazard.

Duct tape

BOTTOM VENTING:

Dryer Exhaust to the bottom of cabinet for

Gas and Electric models.

Remove the screw inside the dryer exhaust duct

and save. Pull the duct out of the dryer. Detach

and remove the bottom knockout.

Remove

screw

and save

Remove desired

knockout (one only)

Fixing hole

Cut the duct as shown and keep portion A.

ø4”

Bottom

- Fire Hazard

WARNING

Close the back opening with cover plate (Kit

WE1M454).

Disconnect dryer from electrical supply.

Wear gloves and arm guards.

Failure to do so may result in fire, electrical shock

or lacerations.

1 ... 27 28 29 ... 144

Comments to this Manuals

No comments

GE GFDR480EFWW Use and Care Manual Page 28

Comments to this Manuals

Related products and manuals for Tumble dryers GE GFDR480EFWW