GE JTP20 User Manual download pdf (Page 5)

5

Cabinet Width 30”

Recommended

Minimum

Cutout Location

from Floor 32 1/2”

Cutout Depth 23 1/2” Min.

Cutout Width 28 1/2” Min.

28 5/8” Max.

Cutout Height 27 1/4” Min.

27 5/16” Max.

If the cabinet does not have a solid bottom,

two braces or runners must be installed

level with the bottom of the cutout to

support the weight of the oven. For single

ovens, the runners and braces must

support 150 lbs.

This oven is not approved for

stackable or side by side installation.

Installation Instructions

Cutout for Single Built-In Oven

NOTE: If the cabinet does not

have a front frame and the

sides are less than 3/4” thick,

shim both sides equally to

establish the cutout width.

A1

C

L

SUITABLE

BRACING

TO SUPPORT

RUNNERS

2" x 4" or

EQUIVALENT

RUNNERS

21 5/8"

OVER CENTERLINE

OF CABINET

2” x 4” or

equivalent

runners

level with

bottom

of cutout

Suitable

Bracing

to Support

Runners

21 5/8”

Over Centerline

of Cabinet

NOTE: If marks, blemishes or the

cutout opening are visible above the

installed oven, it may be necessary to

add wood shims under the runners and

front trim until the marks or opening

are covered.

CUTOUT

HEIGHT

27 1/4" MIN.

27 5/16" MAX.

CUTOUT

WIDTH

28 1/2" MIN.

28 5/8" MAX.

5"

22" TO

BOTTOM OF

JUNCTION BOX

JUNCTION BOX

LOCATION

RECOMMENDED

CUTOUT

LOCATION

32 1/2"

FROM THE

FLOOR

CABINET

WIDTH

30"

ALLOW 11/16" FOR

OVERLAP OF THE

OVEN OVER SIDE

EDGES OF CUTOUT

THE OPENING

BETWEEN INSIDE

WALLS MUST

BE AT LEAST

28 1/2"WIDE

ALLOW 1" FOR

OVERLAP

ON OVEN TOP

AND BOTTOM

OF CUTOUT

21"

ALLOW A MINIMUM

OF 21" FOR CLEARANCE

TO ADJACENT CORNERS,

DRAWERS, WALLS ETC.

WHEN THE DOOR IS OPENED.

Allow 11/16” for

overlap of oven

over side edges

of cutout

21”

5”

Junction Box

Location

Cabinet

Width

30”

Allow a minimum of

21” for clearance to

adjacent corners,

drawers, walls, etc.

when door is open

Cutout

Width

28 1/2” Min.

28 5/8” Max.

22” to

Bottom of

Junction Box

Cutout

Height

27 1/4” Min.

27 5/16” Max.

Opening

Between

Inside Walls

Must Be

At Least

28 1/2” Wide

Recommended

minimum cutout

location from

floor 32 1/2”

Allow 1”

minimum for

overlap of oven

top and 1

1

⁄

4

”

overlap of oven

bottom of cutout

1 2 3 4 5 6 7 8 9 10 ... 15 16

Comments to this Manuals

No comments