GE General Electric Computer Monitor LTC-MAP 2130 User Manual download pdf (Page 46)

3-22 Section 3: Installation

February 3, 2000 70055MP Revision D

Modem Communications

To establish communications via a modem:

1. If not already installed, mount the modem inside the monitor using the

supplied Velcroattachments.

2. Connect the modem per the instructions supplied with it.

See Figure 3-11 for modem mounting location and typical connections.

3. Set JP12 on the I/O board to select the modem power supply. Refer to

Modem Power Supply Configuration earlier in this section.

4. Be sure the serial port speed rate is set to 19200 bps (positions 3 and 4

on SW4 on the CPU board should be open).

Figure 3-11: Modem Location and Connections

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 67 68

No comments

GE General Electric Computer Monitor LTC-MAP 2130 User Manual Page 46