GE General Electric Computer Monitor LTC-MAP 2130 User Manual download pdf (Page 19)

Section 2: Getting Started 2-5

70055MP Revision D February 3, 2000

LCD Display

The LCD is a 20 character by 4 line display (Figure 2-3). It displays

operating and status conditions. Screens are scrolled through using

the Operating Conditions and Alarm Status & Settings buttons.

L T C - M

A P 2 1 3 0

r e v 2 1 3 0 . x x . y y

c o p y r I g h t ( C ) 1 9 9 7

< <

Operating Alarm Status

Conditions & Settings

Figure 2-3: Display with Control Buttons

Serial Port

CAUTION: The serial port and the modem cannot function

simultaneously. When using the serial port for communications, the

internal modem (if installed) must be disconnected at JP8; otherwise

the serial port will not function.

The serial port is a 9-pin male DB-9 connector. This port allows direct

connection, utilizing a null modem cable, between the LTC-MAP 2130

and a portable computer for data transfer. Data transfer rate is

19.2 kbps.

The serial port does not support dumb terminal operation. In order for

communications to take place:

• A null modem cable must be installed between the monitor serial

port and personal computer serial port.

• SAGE host software must be installed on the personal computer.

NOTE: A null modem cable is available (Part No. 10101MP ).

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 67 68

No comments

GE General Electric Computer Monitor LTC-MAP 2130 User Manual Page 19