GE SV-60 Operations Manual download pdf (Page 4)

www.ge.com/inspectiontechnologies

Warning and Precautions

DIRECT VIEWING OF EXITING LIGHT CAN BE HARMFUL!

The light at the front of the light source and at the tip of a connected fiber-optic bundle is

of high intensity and can result in very high temperatures. To minimize the risk of injury,

avoid direct viewing of the light or contact with surrounding surfaces. Light includes UV

wavelengths which may cause skin or eye irritation from direct exposures exceeding 15

min./day.

TO PREVENT TEMPORARY BLINDING

and contact with heated parts, always plug the fiber optic bundle into the light source

before turning the power on.

ALWAYS PROVIDE ADEQUATE VENTILATION

to prevent overheating. Do not cover the light source or place the unit within 7.62 cm (3 in.)

of a solid object.

DURING OPERATION, THE LAMP SHOULD BE ENCLOSED

in the light source to prevent injury in the occasional circumstance of the lamp shattering.

USE CAUTION WHEN REPLACING LAMP.

Allow lamp to cool. Use only GE Inspection Technologies replacement lamp #SPL-600. For

optimum performance, avoid handling the bulb or reflector. Fingerprints or other contami-

nants on the glass may result in performance degradation.

DO NOT SWITCH THE LIGHT SOURCE ON AND OFF IN RAPID SUCCESSION.

Doing so will dramatically shorten lamp life. After turning off, wait 15 seconds before

turning on again.

The supplied detachable power cord is the means of disconnect from the power source.

ELSV-60 Light Source 3

1 2 3 4 5 6 7 8 9 ... 17 18

No comments

GE SV-60 Operations Manual Page 4