GE GFK-2489 User Manual download pdf (Page 129)

GFK-2489 Chapter 5 Sample Configurations 5-15

8. The Wizard displays a prompt to select a point-to-point or point-to-multipoint connection.

Press B to select “All Remotes” (broadcast).

Serial Configuration Wizard Menu

With the host connected directly to a serial port, all of its data

will be transmitted over the air. The data can either be transmitted

to a single remote radio, or broadcast to all associated remote

radios at the same time. Would you ike to transmit to one radio

or all associated radios?

Data is currently being sent to All Remotes

A) One Remote

B) All Remotes

Select a letter to configure an item, <ESC> for prev menu, ‘Q’ to quit wizard

9. The next screen prompts for the input serial data port. Press A and then press SPACE to

toggle to COM2. Press ENTER to accept the displayed selection. Then press N to

continue.

Serial Configuration Wizard Menu

Please choose which serial port on the remote radio(s)

that all of the data should be sent through.

A) Remote Port Com 2

B) Continue Wizard

Select a letter to configure an item, <ESC> for prev menu, ‘Q’ to quit wizard

10. The next screen prompts for the baud rate and byte format.

Press A to set the Data Baud Rate. Press SPACE to cycle through the baud rate options

until the baud rate for your equipment is displayed. (In the example below, the baud rate is

19200.) Press ENTER to accept the Data Baud Rate.

1 2 ... 124 125 126 127 128 129 130 131 132 133 134 ... 183 184

No comments

GE GFK-2489 User Manual Page 129