GE GFK-2489 User Manual download pdf (Page 119)

GFK-2489 Chapter 5 Sample Configurations 5-5

Step-by-step instructions for configuring a point-to-point serial

connection

1. Connect a powered AP radio to a PC.

2. At the PC, open a connection with the Access Point radio using a terminal, Telnet,

or Web browser session.

3. Press G to display the Main Menu.

4. From the Main Menu, press D to select Local Serial Configuration.

Main Menu

A) Starting Information Screen G) Wireless Network

B) Network Configuration H) Statistics / Event Log

C) Radio Configuration I) Device Information

D) Local Serial Configuration J) Maintenance / Tools

E) Remote Serial Gateway K) Redundancy

F) Security Configuration L) DNP3 Routing

Select a letter to configure an item, ‘Q’ to exit menu

5. The Local Serial Configuration menu displays the status of the AP COM1 and

COM2 ports (enabled or disabled). Set the COM2 port to “enabled”.

Press C to select COM2, then press

SPACE to toggle between “enabled” and

“disabled”. Press

ENTER when “enabled” is displayed to select it.

Then press D to continue.

Local Serial Configuration Menu

Com1 Com2

A) Port Status: disabled C) Port Status: enabled

B) Serial Config. Wizard D) Serial Config. Wizard

Select a letter to configure an item, <ESC> for the prev menu

6. Press A to start the Serial Configuration Wizard.

1 2 ... 114 115 116 117 118 119 120 121 122 123 124 ... 183 184

No comments

GE GFK-2489 User Manual Page 119