GE GFK-2489 User Manual download pdf (Page 102)

4-8 TranSphere TS Wireless Extended Range IP Networking Transceivers – January 2008 GFK-2489

bytes. The Remote can thus buffer up to 1500 bytes of serial data (from the

RTU) before splitting the serial data into separate packets. Each packet, when

transmitted over the air to an AP, is transmitted out of the AP local serial port

as a separate packet. This parameter does not affect serial data/packets

received by the Remote over the air and transmitted out of the local Remote

serial port.

CMD—Displays all settable optional arguments and their current values. You

can copy this list to a text file as a record of your configuration.

FLOWCTRL=<mode>—Sets or displays the transceiver hardware flow control

status.

Optional arguments:

NONE —Hardware flow control disabled

CTS_CTRL —CTS (Clear-to-Send) flow control

CTS_RTS —CTS follows RTS (Ready-to-Send) flow control

RTS_CTS —DCE RTS/CTS hardware-based flow control

FORMAT=<format>—Sets or displays the COM2 port data characters, parity,

and stop bits setting. Valid data parameters are:

7N1 —seven char bits, no parity, one stop bit

7N2 —seven char bits, no parity, two stop bits

7O1 —seven char bits, odd parity, one stop bit

7O2 — seven char bits, odd parity, two stop bits

7E1 —seven char bits, even parity, one stop bit

7E2 —seven char bits, even parity, two stop bits

8N1 —eight char bits, no parity, one stop bit (default setting)

8N1 —eight char bits, no parity, two stop bits

8O1 —eight char bits, odd parity, one stop bit

8O1 —eight char bits, odd parity, two stop bits

8E1 —eight char bits, even parity, one stop bit

8E2 —eight char bits, even parity, two stop bits

Entering data formats other than those listed above may cause undesired

operation.

INTERGAP—Sets or displays the transceiver inter-packet gap status.

Optional arguments:

IO —For incoming or outgoing serial data

IN —For incoming serial data only

IOL —For incoming or outgoing (low latency) serial data

INL —For incoming (low latency) serial data only

1 2 ... 97 98 99 100 101 102 103 104 105 106 107 ... 183 184

No comments

GE GFK-2489 User Manual Page 102