Ge Monogram ZVC36 User Manual download pdf (Page 7)

Design Information

PRODUCT DIMENSIONS

4″

40-1/2″

21-1/4″

1/2″

7/8″

7-1/2″

A 1/2″ wide flange surrounds the outside edge of

the insert sleeve.

Remote Location for the Control

The control may be removed from the hood

and installed into a wall or countertop. A 30-ft.

length of wire is supplied to accommodate most

installations. A blanking plate covers the opening

when the controls are removed.

The overall size of the control is 4-1/4″ wide and

2-1/4″ deep.

We recommend that the cutout in granite or other

hard surfaces be made before the countertop is

installed.

The stainless steel liner is shipped with each hood

insert. This non-combustible liner protects the

underside of the canopy.

Custom Liner

If you are not using the supplied liner, you may

construct a custom non-combustible liner. Use the

supplied liner as a template. The opening must be

38-3/4″W x 13-3/16″D. 3/4″ thick material must

surround the opening to allow the sleeve locking

clips to engage. The insert sleeve inside the cabinet

should be positioned 1/2″ from the rear wall so

that the center of the 8″ duct is 5-1/2″ from the

rear wall.

*Opening

ZVC42

The custom canopy must be sized to fit the insert

sleeve. Construct the canopy with an opening

that is:

38-3/4″W x 13-3/16″D

The opening must be constructed of 3/4″ thick

material to allow the sleeve locking clips to

engage.

The Supplied Liner

Dimensions and Specifications (in inches)

Outside Dimensions

The Insert Sleeve

38-1/2″

13″

14″

29-1/2″

1/2″

13″

1-11/16″

3-11/16″

Control cutout

14″

39-1/2″

Front side

1 2 3 4 5 6 7 8 9 10 11 12 ... 67 68

Comments to this Manuals

No comments

Ge Monogram ZVC36 User Manual Page 7

Comments to this Manuals

Related products and manuals for Fans Ge Monogram ZVC36