Ge 49-7400 User Manual download pdf (Page 5)

The vent control is located on the inside of the air

louvers in the lower right corner.

When set at

, only the air inside the room will

be circulated and conditioned. When set at

OPEN

some inside air is exhausted outside.

Consumer SupportTroubleshooting Tips

Operating InstructionsSafety Instructions

Installation Instructions

www.GEAppliances.com

When the air conditioner is turned on, it will

automatically start in the setting last used.

Lights next to the touch pads on the air conditioner

control panel indicate the selected settings.

Vent Control

To open the vent, push the lever to the right.

To close it, push it to the left.

COOL Mode

Use the

COOL

mode with

HIGH, MED

LOW

fan for

cooling. Use the

INCREASE

▲

/ DECREASE

▼ pads to

set the desired temperature between 64°F and 86°F

in 1°F increments.

A thermostat is used to maintain the room

temperature. The compressor will cycle on and off

to keep the room at the set level of comfort. Set the

thermostat at a lower number and the indoor air

will become cooler. Set the thermostat at a higher

number and the indoor air will become warmer.

NOTE: If the air conditioner is off and is then turned on

while set to COOL, it will take approximately 3 minutes

for the compressor to start and cooling to begin.

Cooling Descriptions

For Normal Cooling–

Select the

COOL

mode and

HIGH

MED

fan with a middle set temperature.

For Maximum Cooling–

Select the

COOL

mode and

HIGH

fan with a lower set temperature.

For Quieter & Nighttime Cooling–

Select the

COOL

mode and

LOW

fan with a middle set temperature.

NOTE: If you switch from a COOL setting to OFF or to a

fan setting, wait at least 3 minutes before switching

back to a COOL setting.

Air Direction – Up and Down

Fingertip pressure on the horizontal louvers adjusts

the air direction up or down.

FAN Mode

Use the

FAN

HIGH, MED

LOW

to provide air

circulation and filtering without cooling. Since fan

only settings do not provide cooling, a temperature

setting will not be displayed.

1 2 3 4 5 6 7 8 9 10 ... 19 20

Comments to this Manuals

No comments

Ge 49-7400 User Manual Page 5

Comments to this Manuals

Related products and manuals for Conditioners Ge 49-7400