GE FTP-1000 User Manual

AB1234567890*#StayAwayDisarmQuickExitCDFTP-1000 Touchpad/DisplayInstallation Manual

FTP-1000Installation Manual8Changing chime and trouble beep tonesThe frequency (pitch) of chime and trouble beep tones from each touchpad can be adjus

9TroubleshootingThe following describes what to do if the touchpad does not operate correctly.• The touchpad doesn’t power up (no display and no beeps

FTP-1000Installation Manual10Appendix A Specifications and noticesNote: See specific panel installation instructions for complete UL installation re

Copyright Copyright © 2005, GE Security Inc. All rights reserved. This document may not be copied or otherwise reproduced, in whole or in part, ex

1PrefaceThis is the GE FTP-1000 Installation Manual for model 600-1020. This document includes an overview of the product and detailed instructions e

FTP-1000Installation Manual2Product overviewThe FTP-1000 lets you control the operation of compatible security systems (see Table 4 on page 10).The la

3InstallationUse the following instructions to install and wire your touchpad.Guidelines• Mount the touchpad in an environmentally controlled area (32

FTP-1000Installation Manual42. For wall mounting, place the mounting plate on the wall and mark the mounting holes (see Figure 2). Be sure to leave a

5Figure 3. Touchpad wiring connectionsAttaching the touchpad to the mounting plateAlign the tabs at the top of the mounting plate with the slots on th

FTP-1000Installation Manual6TestingUse the following procedures to test the touchpad for display function, button function, and system operation.Test

7Adjusting display brightnessYou can adjust the background lighting (provided by yellow LEDs) of each touchpad individually to help compensate for lig