GE CC-SCSTAT User Manual download pdf (Page 23)

Heating delta stage 3 on: 1 to 8 degrees (default 5). Set the delta from setpoint that stage 3 heating

starts. Stage 3 turns off at setpoint.

Cooling delta stage 1 on: 1 to 8 degrees (default 1). Set the delta from setpoint that stage 1 cooling

starts. Stage 1 turns off at setpoint.

Cooling delta stage 2 on: 1 to 8 degrees (default 3). Set the delta from setpoint that stage 2 cooling

starts. Stage 2 turns off at setpoint.

WDU settings submenu.

Messaging enable: Y or N (default N). Enable (Y) or disable (N) the network messaging function. If

you intend to use the messaging capability of the thermostat, you must enable it here by setting it to Y.

Messages will then appear as a menu item in the main Menu screen and you will be able to receive and

browse through the messages.

CAUTION: Do not change the installer settings unless you are sure of the effect these changes will make. Changing the

network address will make the thermostat not respond if the address is incorrect.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 43 44

No comments

GE CC-SCSTAT User Manual Page 23