GE Calibur CBR-PB3-WD User Manual download pdf (Page 14)

Kalatel CBR-PB3-WD 14 0150-0261A

5.2 Configuring the PB3 for POS Interface

1. Associating ECR data to a specific camera.

Dipswitches 5-8 on SW1 are used for assigning an

ECR’s transaction text to a specific camera.

Please refer to Section 8 for the specific dipswitch

camera assignments. The default setting is for

switches 5-8 to be all OFF (All switches Up =

Camera 1).

2. Program the DVMRe for the desired recording functions based upon

the presence of transaction text. In addition make sure the RS-232 port

on the DVMRe is configured correctly set via the DVMRe Setup Menus:

a. COMMUNICATIONS>RS-232>PORT (1 OR 2)>19200

i. Port 2 is used if DVMRe-CT/eZT/StoreSafe

ii. Port 1 is used if DVMRe-CS/CD/eZ

Transaction text is captured with video regardless of the

recording mode (Time-Lapse, Time-Lapse + Event, or Event

Only). If Time-Lapse + Event or Event Only recording

modes must have at least one (1) second set for the pre-

event duration.

3. Process several POS transactions at the Cash Register.

a. To verify proper operation with a DVMRe-CT/eZT/StoreSafe

unit:

i. Select full-screen on the Main Monitor (A) the camera

associated with a PB3 unit. Press the camera button

until the text box window appears in the display.

ii. The text box will display any transaction data as it is

passed to the PB3 unit from the POS device. Be

aware that some POS devices only send transaction

data until the end of the transaction (when the receipt

is printed).

NOTE

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 36 37

No comments

GE Calibur CBR-PB3-WD User Manual Page 14