GE DVM1950 User Manual download pdf (Page 29)

Removing and Cleaning the Filters

Toremove, slidethem to the rear using the

tabs. Pulldown and out.

Toclean the vent filters,soak them and then

swish around in hot water and detergent.

Don't useammonia or ammonia products

because they will darken the metal. Light

brushing can be used to remove embedded

dirt.

Rinse,shake and letdry before replacing.

Toreplace, slide the filters into the frame slots

on the back of each opening. Pressup and to

the front to lock into place.

Charcoal Filter

Thecharcoal filter cannot be cleaned.

It must be replaced. Order Part No.

WBO2X10956from your GEsupplier.

Ifthe model is not vented to the outside, the

air will be recirculated through adisposable

charcoal filterthat helps remove smoke and

odors.

Thecharcoal filter should be replaced when it

isnoticeably dirty or discolored (usuallyafter

6 to 12 months, depending on usage).See

"Optional Kits,"page 8,for more information.

Remove 2 grille screws to remove

the grille.

To Remove the Charcoal Filter

Toremove the charcoal filter, first disconnect

power at the main fuse or circuit breaker,

or pullthe plug. Removethe top grille by

removing the two screwsthat hold it in place.

You may need to open the cabinet doors to

remove the screws.

Liftthe filter at the bottom until it comes free

of the tabs. Slidethe filter down and out.

IIIIlll

29

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 67 68

Comments to this Manuals

No comments