Ge JK91527 User Manual download pdf (Page 23)

Do not use a steel-wool pad; it will

scratch the surface.

To clean the stainless steel surface,

use warm sudsy water, a stainless steel

cleaner such as Kleen King

or an

all-purpose liquid or spray cleaner.

Always scrub in the direction of the

grain. Rinse thoroughly with a sponge

or cloth and clean water. Dry with a soft,

clean cloth.

After cleaning, use a stainless steel

polish, such as Stainless Steel Magic

Revere Copper and Stainless Steel

Cleaner

or Wenol All Purpose

Metal Polish

. Follow the product

instructions for cleaning the stainless

steel surface.

Safety Instructions Operating Instructions Care and Cleaning Troubleshooting Tips

Consumer Support

Care and cleaning of the oven. www.GEAppliances.com

Be sure electrical power is off and all surfaces are cool before cleaning any part of the oven.

How to Remove Packaging Tape

To assure no damage is done to the finish

of the product, the safest way to remove

the adhesive left from packaging tape

on new appliances is an application

of a household liquid dishwashing

detergent, mineral oil or cooking oil.

Apply with a soft cloth and allow to soak.

Wipe dry and then apply an appliance

polish to thoroughly clean and protect

the surface.

NOTE: The plastic tape must be removed from all

chrome trim. It cannot be removed if it is baked on.

Oven Light Bulbs

NOTE: The glass cover should be

removed only when cold. Wearing latex

gloves may offer a better grip.

CAUTION: Before replacing your

oven light bulb, disconnect the electrical

power to the oven at the main fuse or

circuit breaker panel.

Be sure to let the light cover and bulb

cool completely.

For your safety, do not touch a hot bulb

with bare hands or a damp cloth.

To remove:

Turn the glass cover

counterclockwise 1/4 turn until the

tabs of the glass cover clear the

grooves of the socket.

Using gloves or a dry cloth, remove

the bulb by pulling it straight out.

To replace:

Use a new 130-volt Halogen bulb,

not to exceed 50 watts.

Using gloves or a dry cloth, remove

the bulb from its packaging. Do not

touch the bulb with bare fingers.

Push the bulb straight into the

receptacle all the way.

Place the tabs of the glass cover into

the grooves of the socket. Turn the

glass cover clockwise 1/4 turn.

For improved lighting inside the

oven, clean the glass cover

frequently using a wet cloth. This

should be done when the oven is

completely cool.

Reconnect electrical power to

the oven.

Bulb

Socket

Tab

Glass cover

Receptacle

Use gloves

or cloth

Receptacle

Stainless Steel Surfaces (on some models)

1 ... 22 23 24 ... 32

Comments to this Manuals

No comments

Ge JK91527 User Manual Page 23

Comments to this Manuals

Related products and manuals for Kiln Ge JK91527