GE PSE25KSHSS Instruction Manual download pdf (Page 21)

Trim kits and decorator panels. GEAppliances.com

Read these instructions completely and carefully.

Before You Begin

Some models are equipped with trim kits that allow you to install door panels. You can order pre-cut black, white,

bisque or stainless steel decorator panels from GE Parts and Accessories, 800.626.2002, or you can add wood

panels to match your kitchen cabinets.

Panels less than 1/4” (6 mm) thick

When installing wood panels less than 1/4” (6 mm) thick, you need to create a filler panel, such as 1/8” cardboard, that will fit

between the face of the door and the wood panel. If you are installing the pre-cut decorator panels, pre-cut filler panels are included

in the kit. The combined thickness of the decorator or wood panel and the filler panel should be 1/4” (6 mm).

For CustomStyle

™

models

3/4” (19 mm) or Raised Panel

A raised panel design screwed or glued to a 1/4” (6 mm) thick backing, or a 3/4” (19 mm) routed board can be used. The raised

portion of the panel must be fabricated to permit clearances of at least 2” (5.1 cm) from the handle side for fingertip clearance.

Panels thicker than 1/4” (6 mm), up to 3/4” (19 mm) max, will require that the outer 5/16” (8 mm) of panel perimeter be no thicker

than 1/4” (6 mm).

Weight limitations for custom panels:

Fresh Food 38 lbs. (17 kg) max.

Freezer Door 28 lbs. (13 kg) max.

Appearance

Panel

Refrigerator

Door

1/4” (6 mm)

Thick Backing

3/4”

(19 mm)

2” (5.1 cm)

Clearance

Handle Side

Panels thicker than 1/4” (6 mm)

1/4” (6 mm) max

3/4” (19 mm)

5/16” (8 mm)

Panels 1/4” thick or less

1/4” max

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 143 144

No comments

GE PSE25KSHSS Instruction Manual Page 21