GE PSE25KSHSS Instruction Manual download pdf (Page 17)

Select CUBED, CRUSHED or WATER.

Press the glass gently against the top

of the dispenser cradle.

The spill shelf is not self-draining. To reduce water

spotting, the shelf and its grille should be cleaned

regularly.

If no water is dispensed when the refrigerator is first

installed, there may be air in the water line system.

Press the dispenser arm for at least two minutes to

remove trapped air from the water line and to fill the

water system. To flush out impurities in the water

line, throw away the first six glassfuls of water.

CAUTION: Never put fingers or any other objects into

the ice crusher discharge opening.

Locking the Dispenser

Press the LOCK or

LOCK CONTROLS

pad for

3 seconds to lock the dispenser and control panel. To

unlock, press and hold the pad again for

3 seconds.

Dispenser Light

The LIGHT pad turns the night light in the dispenser

on and off. The light also comes on when the

dispenser cradle is pressed. For models with a bulb,

if the light burns out, it should be replaced with a 6

watt 12V maximum bulb. For LED models contact

Factory Service.

Door Alarm

Use Door Alarm to sound if either door is open

for more than 3 minutes. The alarm will stop

once the door is closed. For LCD models, a popup

screen will appear. The alarm can be silenced

by touching the LCD screen.

Touch LED Dispenser Control:

Press the SET FEATURES pad once and DOOR

ALARM will blink. Press ON/OFF and the door alarm

will be set and the icon will turn solid. Press ON/OFF

again to turn the alarm off.

Door Alarm (on Tactile LED Dispenser Control

model)

To set the alarm,

press this pad until the

indicator light comes on.

This alarm will sound if either

door is open for more than 3

minutes. The light goes out

and the beeping stops when

you close the door.

About the ice and water dispenser. (on some models) GEAppliances.com

To Use the Dispenser

Spill Shelf

Precise Fill (on some models)

Quick Ice

This water dispenser is equipped with a feature

called “precise fill.” This feature allows you to choose

a precise amount of water (cups or ounces) that

you would like dispensed. Pints and Liters are also

available for LCD models.

Touch LED Dispenser Control

Press the PRECISE FILL CUPS/OZ pad.

The WATER pad will light and the CRUSHED

and CUBED ice pads will turn off. The last unit

used will be displayed.

Press the PRECISE FILL pad again to toggle

between cups and ounces.

If you selected OUNCES, press the

pad

to select the number of ounces you would like

to have dispensed between 2–99 ounces.

The default is 8 ounces.

If you selected CUPS, press the

pad to

select the amount you would like to have dispensed.

They are displayed as 1/4, 1/3, 1/2, 2/3 and 3/4, with

the highest amount being 16 3/4 cups. The default

is 1 cup.

Press the cup against the cradle and water will

begin dispensing. It will automatically stop when

the amount set has been dispensed. The display

will show the amount of water dispensed, beep,

then reset after 5 seconds.

NOTE: Do not leave the dispenser unattended when

water is being dispensed.

If you would like to stop dispensing water

before the specified amount has been

dispensed, just remove the cup from the cradle.

The display will show the amount that has been

dispensed for 5 seconds. If the cup switch is

pressed again within that time, the dispenser

will continue up to the set amount. If not, the

display will return to the set amount.

When you need to speed up ice production, use the

Quick Ice feature. While this feature is turned on,

the freezer fan runs continuously for 48 hours, or

until the feature is turned OFF. During this period, ice

production will increase up to 40%. Models with the

integrated ice feature system require at FIRST USE at

least half an 8 oz. glass of ice to be dispensed every 6

to 12 hours. This will help the ice maker fill the bucket

properly so that dispensing is better.

How to Use

Touch LED Dispenser Control:

Press the SET FEATURES pad twice and QUICK ICE

will blink. Press ON/OFF to turn the feature on, then

again to turn it off.

Quick Ice (on Tactile LED Dispenser Control

model)

When you need ice in a

hurry, press this pad to

speed up ice production. This

will increase ice production

for the following 48 hours

or until you press the pad

again.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 143 144

Comments to this Manuals

No comments

GE PSE25KSHSS Instruction Manual Page 17

Comments to this Manuals

Related products and manuals for Fridges GE PSE25KSHSS