GE GDR20DTERWW Operations Instructions download pdf (Page 26)

Installation Instructions

REHANG REFRIGERATOR DOOR

Lower the refrigerator door onto the center hinge

pin. Ensure that the plastic hinge pin thimble is on

the center hinge pin or inside door hinge pin hole

located in the bottom of the door.

Insert the door thimble into the hinge hole

on top of the refrigerator door and then

insert the top hinge pin. Make sure the door

is aligned with the cabinet. Attach the hinge

to the top of the cabinet loosely with the bolts.

Make sure the gasket on the door is flush against

the cabinet and is not folded. Support the door on

the handle side and make sure the door is straight

and the gap between the doors is even across the

front. While holding the door in place, tighten the

top hinge bolts. Replace the hinge cover.

INSTALL THE LOGO BADGE

Remove the adhesive backing paper

and align the pins on the back of the badge

with the holes in the door. Apply pressure to

the badge to ensure it sticks to the door.

REVERSING THE DOOR SWING (cont.)

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 42 43

No comments

GE GDR20DTERWW Operations Instructions Page 26