Ge 45236 GE Wireless Color Camera with Portable LCD M User Manual

www.jascoproducts.com1-800-654-848345236Home MonitoringWireless Color Camera with Portable LCD MonitorUser Manual

10SensorInfra-Red (IR) LEDsNight VisionThe 45233 Wireless Color Camera features Night Vision technology. Objects and images can be seen in little or n

11corresponds to the camera channel setting.5. Adjust antenna and camera angle as needed for the clearest picture. Positioning the antenna upwards to

123. Set Channel switch on camera to 1 or 2. Slide the camera onto the alignment and locking pins of the mounting plate. Plug in AC adapter into camer

132. Pressing the “menu” button twice…the Middle LED will light-up in blue. You can then adjust the Color by pressing “+” or “-” on the Volume/Adjust

14USING THE 45236 WIRELESS COLOR CAMERA SYSTEM WITH A VCRYou can connect the 45236 LCD Monitor (using the supplied A/V cable) to a VCR, DVR or another

15approximately 5 hours* on a single charge. To orderthis battery, please visit www.jascoproducts.com/batteryoffer or call our Customer Support depart

16Interference on camera picture1. Make sure each camera (transmitter) is within range, and that no large obstructions are blocking the signal.2. Try

17Mini. Illumination: ...0 lux at 3 ft, 0.5 lux at 10ftVoltage...

18FCC STATEMENTNOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC R

2Thank you for purchasing the GE 45236 Wireless Color Camera System with Portable LCD Monitor. Please review these instructions carefully before attem

3PACKAGE CONTENTSPlease check and identify all the parts before proceeding with the installation.45233 Wireless Color Camera45236 Portable 2.5” Color

4CHOOSING A CAMERA MOUNTING LOCATIONThe 45233 Wireless Color Camera can be positioned on a desktop, or mounted to a wall. It is suitable for indoor or

5If using the optional rechargeable NiMH battery (sold separately), the operational time is up to 5 hours, depending on usage. The Camera has an unobs

612MenuAlarmVolumeAdjustmentChannelSelectionSwitchBatteryCompartmentSensitivityAdjustmentTRIGGERCHANNEL SELECTION2. Similarly, set the slide switch lo

7CHANNEL SELECTIONManual, Auto or Stand-byThe wireless system can beset to operate in one of three modes: Manual, Auto or Stand-by. The desired operat

8separately. IMPORTANT: When using more than one camera, each camera must be assigned to a specifi c channel using the channel selection switch located

9Note: two cameras must be available in order for Auto mode to operate correctly. Both cameras cannot be on the same channel or the signals will cance