Wireless ColorDigital Home Monitoring KitUser Manual45255 ver1GE is a trademark of General Electric Company and is under license by Jasco Products Com
10• Press and release the ‘quad/scan’ button until multiple camera video streams appear on the screen.11234324QUAD VIEW2. Sequential (Scan)• Display
11Automatically Record with motion and/or sound detectionActivates recording when motion and/or sound is detected by camera.• WITHOUT notifi cation ala
124. Press and release the ‘auto’ button on the right side of the monitor. A red light will illuminate near the top left of the display indicati
134. Use the directional keypad to select the fi le desired. Press and release the ‘ok’ button to select. The video selected will start playing i
144. Press and release the ‘pair’ button, located on the bottom rear part of the camera head. The monitor will allow 30 seconds before timing o
15SPECIFICATIONS: GENERALRF Frequency: ...2.4~2.48 GHzTransmit Power:
2For the most up-to-date product support, accessories, electronic (PDF) format manuals and more, visit www.jascoproducts.com/supportor Call 1-800-654-
3Congratulations on your purchase of the GE Wireless Color Digital Home Monitoring Kit! Please review these instructions carefully and retain them for
4FEATURES MONITOR• High contrast 3.5” LCD color monitor for remote video and audio monitoring• 2.4GHz digital wireless technology—private and secure
5INITIAL SETUP: CAMERANOTE: Before use, remove the plastic fi lm protecting the night vision LEDs (around lens).Supply power to the camera using one o
6• AC Adapter into Cradle-1. Plug-in the AC power adapter into an electrical outlet. 2. Insert the other end of the AC power adapter into the
7To be notifi ed with the screen in standby mode...1. Adjust/disable audio & motion sensitivity (refer to the ‘Settings’ section in the manual)
83. Press and release the ‘ok’ button. Use the directional keypad to highlight either ‘1x’ or ‘2x’. 4. Press and release the ‘ok’ button. Press and
9 ADJUSTING THE BRIGHTNESS1. Press and release the ‘menu’ button on the monitor. Using the directional keypad, highlight the ‘Settings’ option. 2
Comments to this Manuals