Ge 45235 GE Home Monitoring Wireless Black-and-White User Manual Page 1

www.jascoproducts.com1-800-654-848345235Home MonitoringB/W Wireless Camera System with MonitorUser Manual

10Desktop Mount: 1. Place camera in desired location on a fl at surface. 2. Set Channel switch on camera to 1 or 2.3. Reconnect AC adapter to the camer

113. Set Channel switch on camera to 1 or 2. Slide the camera onto the alignment and locking pins of the mounting plate.4. Adjust antenna and camera a

12OPTIONAL WIRELESS BATTERY PACK AVAILABLE (SOLD SEPARATELY)Rechargeable NiMH Battery is available for use withthe 45235 Wireless B/W Camera. This 850

13No camera picture1. Check all connections. Make sure camera(s) and receiver are powered ON.2. Ensure camera(s) and receiver are set to correct chann

145. Adjust the antennas of the monitor and camera(s).Audio problems1. Ensure the volume is turned up suffi ciently on the Monitor (or TV).2. Make sure

15Current Consumption ...Approx. 800 mAOutput ...

16FCC STATEMENTNOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC R

2Thank you for purchasing the GE 45235 B/W Wireless Camera System with Monitor. Please review these instructions carefully before attempting to operat

345235B/W Wireless Camera45235 5.5” B/W CRT monitorWall mounting hardware2 AC adaptersBEFORE YOU INSTALLWhen choosing the best location for the placem

4Do not use in wet locations. If using outside, position camera in a sheltered location.Do not position the camera so that it points directly into the

5CONNECTING TO THE MONITORBefore beginning installation, we recommend that you temporarily “connect” the 45235 B/W Wireless Camera to the 5.5” Monitor

6setting (1 or 2) located on the unside of the camera housing. (See Channel Selection.)4. Brightness/Contrast and Vertical Hold can be adjusted with c

7Multi-Camera OperationThis wireless surveillance system is designed to work with up to 2 cameras. Additional cameras are sold separately. IMPORTANT:

8to 1/2 position. Next, press the AUTO button on the front panel of the Monitor. The green LED will light and the Monitor will automatically select be

9SensorInfra-Red (IR) LEDsenough light, color will return to the images.AUDIO DETECTION AND NOTIFICATION FEATUREThis feature allows the systemto emit