GE
Lighting
Installation Guide
imagination at work
BEFORE YOU BEGIN
Read these instructions completely and carefully.
FOR USE WITH CEILING MOUNTED TRACK ONLY.
READ JUNO TRACK INSTALLATION INSTRUCTIONS
FOR GUIDELINES ON TRACK INSTALLATION.
WARNING
RISK OF ELECTRIC SHOCK
Turn power off before inspection, installation or removal.
CAUTION
To reduce risk of re and electric shock, use only with
Juno single circuit track system.
IMPORTANT SAFETY INSTRUCTIONS
When installing or using this track system, basic safety
precautions should always be followed, including the
following:
a) Read all instructions
b) Do not install this track in damp or wet locations.
c) Do not cut any track sections.
d) Do not install any part of a track system less than
5 feet above the oor.
e) Do not install any luminaire assembly closer than
6 inches from any curtain, or similar combustible material.
f) Disconnect electrical power before adding to or
changing the conguration of the track.
g) Do not attempt to energize anything other than
lighting track luminaires on the track. To reduce the risk
of re and electric shock, do not attempt to connect
power tools, extension cords, appliances, and the like to
the track.
h) Do not connect a track to more than one branch
circuit unless the track is constructed so that it can be
used with more than one branch circuit. Check with a
qualied electrician. Although the track lighting system
may seem to operate acceptably, a dangerous overload
of the neutral may occur and result in a risk of re.
SAVE THESE INSTRUCTIONS
For future reference when adding xtures
or changing the track conguration.
(TS Series)
Lumination
TM
LED Track Light
Comments to this Manuals