I-20/2008
GE Lighting Solutions • 1-888-MY-GE-LED • www.gelightingsolutions.com
1 - 8 8 8 - 6 9 - 4 3 - 5 3 3
APPLICATIONS
• For over 20-foot (6 meter) applications, assembly lines, inspection areas, production
bays, storage areas, warehouses, commercial and retail areas.
SPECIFICATION FEATURES:
OBE OMNIBEAM
™
400 LUMINAIRE
NUVATION
™
Electronic Ballast
High Bay, Open or Enclosed – Surface Mount Optical Series
ORDERING NUMBER LOGIC
OBE =
Omnibeam
400
Luminaire
Surface
Mount
optical
with
Nuvation
Electronic
Ballast
OBE
PRODUCT
IDENT
XXX
W = White
Polyester
Powder
W
COLOR
X
N
LIGHT
SOURCE
X
G
VOLTAGE
X
E
BALLAST
TYPE
X
V6
OPTICAL
CODE
XX
AC
PHOTOMETRY
CODE
XX
11
MOUNTING
CODE
XX
X
OPTIONS
X
N =
Ballast
will
operate
Pulse Start
or Ceramic
Metal
Halide
Lamps
Note:
Lamp is
vertical
base up.
Lamp
is not
included.
G = 208-277
Discrete
Voltages
must be
specied
when
ordering
cord & plug
assemblies:
2 = 208
3 = 240
4 = 277
E=
Electronic
C=
Dimming
11= Pendant Slide on Box
15 = Prewire with Loop, Cord and Plug part “Power
Hook”. (Order Receptacle/Hook Box separately)
Discrete Voltages must be specied when ordering
cord & plug assemblies below:
31 = Prewired with Hook, 3 ft. (0.9 meters) #16/3 Cord
and NEMA PLUG
33 = Prewired with Loop, 3 ft. (0.9 meters) #16/3 Cord
and NEMA PLUG (Order Locking Receptacle
Separately, if required)
MODULAR PREWIRE
41 = ACS with 3 ft (.9 meter) cord & Hook
69 = ACS with 6 ft (1.8 meter) cord & Hook
43 = ACS with 3 ft (.9 meter) cord & Loop
70 = ACS with 6 ft (1.8 meter) cord & Loop
PLUG-N-GO
51 = Plug-N-Go with 3 ft. (0.9 meter) Cord & Hook
71 = Plug-N-Go with 6 ft. (1.8meter) Cord & Hook
53 = Plug-N-Go with 3 ft. (0.9 meter) Cord & Loop
72 = Plug-N-Go with 6 ft. (1.8 meter) Cord & Loop
Note: ACS = Flex 3+
Plug-N-Go = FSC Series
Q = Automatic
switched quartz
S = Exclusionary
mogul base socket
for MH open xtures.
• 1598 Listed
Suitable for Damp Location
• Choice of open/ventilated or enclosed opticals with
choice of acrylic clear or prismatic lens.
• Prismatic acrylic reector.
• 55° C ambient, standard
• Nuvation ™ electronic ballast:
• Dimming Option — dims lamp to 50% of rated
lamp wattage.
• Two piece heavy-duty die cast
aluminum housing
• Integral optical mounting design
for GELS “Surface Mount Opticals”
• Attractive round ballast housing
design with white polyester paint nish
• Integral air gap between optical
mounting and ballast for optimum
temperature control and thermal
management
• Slide-on mounting box adaptor with
3/4-in pendant and thru feed capability
for ease of installation and mounting.
• External wattage selection port for
selection of 250, 320, 350 & 400 watt
choices.
• Safety chain provisions
• Mogul base socket – E39 standard
• Shipped as components: Ballast, Optical
Magnapack available for ballast.
40
WATTAGE
XX
E2 = Enclosed
22-in. with
clear at
arcylic lens.
P2 = Enclosed
22-in. with
prismatic
conical acrylic
lens.
E6 = Enclosed
26-in. with at
clear acrylic
lens.
V6 = Open
and ventilated
26-in. acrylic.
25 = 250
32 = 320
35 = 350
40 = 400
XX = Select
Code from
Photometric
Selection
Table
Exclusionary base socket is available for use with Metal Halide lamps in open
xtures to comply with NEC 2005 regulations (GELS “S” Option).
Customer should consult or review local electrical codes for compliance.
All Electronic devices are susceptible to transient voltage spikes. For facilities
where the lighting circuits are not protected from transient voltage spikes
a (TVSS) Transient Voltage Surge Suppression system is recommended.
To protect the NuVation ballast a TVS protection system must be able to
suppress a 3000V ring wave as described in ANSI/IEEE C62.41 B1.
Comments to this Manuals