Ge ZIDI240BII User Manual download pdf (Page 6)

STEP 2 INSTALL CUSTOM 3/4"

DRAWER PANELS AND HANDLES

(ZIDI240 model only)

3/4" Overlay Panel Dimensions

Model ZIDI240 requires field-installed

overlay drawer panels.

• The overlay panels must be secured

to 1/4" thick backer panels that

slide into the trims. A .10" thick

spacer panel must be placed

between the overlay and backer

panels.

• Custom handles of your choice,

supplied by your cabinet maker,

must be installed on these overlay panels. Countersink

all screws into the backer panels. Screws cannot

protrude from the backer panels.

IMPORTANT NOTE: Maximum total weight for custom

drawer panels are 25 pounds (12-1/2 pounds maximum

each drawer).

Assemble overlay panels with

glue and screws.

• Center spacer panel on the

backer panel, left to right

and top to bottom. Secure

the panels with glue.

• Center the spacer/backer panel

on the overlay panel. Secure with glue and screws.

Countersink all screws into the backer panel.

3/4" Overlay Panel Dimensions (in inches)

A (Width) B (Height)

1/4" Backer 23-3/16" 14-11/16"

0.10" Spacer 22-1/2" 14-3/16"

3/4" Overlay 23-5/8" 15-1/16"

STEP 1 REMOVE PACKAGING

• Remove corner blocks and foam drawer stops.

• Remove all packing material, tape and protective

plastic coverings.

CAUTION: Small objects are a choke

hazard for children. Remove and discard any parts not

used.

ATTENTION : Les petits objets

peuvent étrangler les enfants. Il faut jeter toutes

les piéces qui ne sont pas utilisées.

Overlay

Panel

1/4"

Backer

Panel

Drawer

.10 Inch

Spacer

Spacer Panel

Backer Panel

Overlay Panel

STEP 2 INSTALL CUSTOM 3/4"

DRAWER PANELS AND

HANDLES

(CONT.)

(ZIDI240 model only)

Install custom drawer panels and handles:

• Open drawers.

• Remove 2 screws holding each trim; lift trims off.

Retain screws.

• Custom handles of your choice, supplied by your

cabinet maker, must be installed onto the overlay

panels before they are slid into the trims. Countersink

all screws into the backer panels. Screws cannot

protrude from the backer panels.

• Slide overlay panels into the trims.

Installation Instructions

Handle

Custom

Drawer Panel

Screws Must

Be Countersunk

Into Panel

12-1/2 lbs. max.

*Maintain a 1/4" min. gap between

top and bottom drawer panels.

1 2 3 4 5 6 7 8

Comments to this Manuals

No comments

Ge ZIDI240BII User Manual Page 6

Comments to this Manuals

Related products and manuals for Refrigerators Ge ZIDI240BII