GE JTP20 User Manual download pdf (Page 7)

7

Installation Instructions

Cutout for Single Built-In Oven

Under Counter

NOTE: This oven is not approved to be

installed under a solid disk, induction

or downdraft modular cooktop.

A3

25"

Gas or electric cooktops

may be installed over this

oven. See cooktop installation

instructions for cutout size.

See label on top of oven for

approved cooktop models.

Gas and electrical connections

for 30" gas cooktop must be

located in an adjacent accessible

location to the right. For a 36"

gas cooktop the connections

may be made to the left.

5"

240V / 208V

Junction Box

Location

36"

Typical

Countertop

Height

24"

Allow 11/16"

Overlap Top

of Oven &

Side Edges

of Cutout

28 1/2" MIN.

28 5/8" MAX.

27 1/4" MIN.

27 5/16" MAX.

Top and/or side

fillers may be

necessary if

unit is positioned

between existing

cabinets. Be sure

they are attached

securely since

they will anchor

the oven in the

cabinet.

3/4" Support

Platform

Required

MUST SUPPORT 150 LBS.

22" MIN.

Above

Support

Platform

5 9/16"

Reference dimension

for maximum support height

with typical 36" countertop

height

MUST SUPPORT 150 LBS.

3/4”

Support Platform

Required

25”

5”

24”

Gas and electrical connections for

30” gas cooktop must be located

in an adjacent accessible location

to the right. For 36” gas cooktop,

the connections may be made

to the left.

240V / 208V

Junction Box

Location

36”

Typical

Countertop

Height

22” Min.

Above

Support

Platform

5 9/16”

Reference dimension for

maximum support height with

typical 36” countertop height

Allow 1” overlap

top of oven and

11/16” overlap

side edges of

cutout

Top and/or side fillers

may be necessary

if unit is positioned

between existing

cabinets. Be sure

they are attached

securely, since they

will anchor the oven

in the cabinet.

Gas or electric cooktops may

be installed over this oven.

See cooktop installation

instructions for cutout size.

See label on top of oven for

approved cooktop models.

28 1/2” Min.

28 5/8” Max.

27 1/4” Min.

27 5/16” Max.

1 2 3 4 5 6 7 8 9 10 11 12 ... 15 16

Comments to this Manuals

No comments